Wonderwood NC Sanding Sealer Wood Coatings


PRODUCT DESCRIPTION


Nerolac Wonderwood NC Sanding Sealer Wood Coatings is a single component Nitro Cellulose based quick drying wood coating.


PERFORMANCE FEATURES & BENEFITS

  • Easy to apply and Sand
  • Very High Building
  • Single Pack
  • Affordable
  • Excellent base coat for Nc and Melamine Based Top coats
  • Fast Drying 


RECOMMENDED USAGE


Recommended for interior on wooden furnitures made of hard/ solid wood, Veneers and Medium Density Fiber board.<


SURFACE PREPARATION

  • Sand the wooden surface along the grains Patten with 180 and 320 Emery Paper.
  • Clean the surface with cloth.
  • Apply 1st coat of Clear Acrylic Lacquer. Allow it to dry for 3-4 hrs.
  • Sand the coated surface along the grains Patten with 320 Emery Paper.
  • Apply 2nd coat of Clear Acrylic Lacquer. Allow it to dry for 3-4 hrs.
  • Sand the coated surface along the grains Patten with 320 or 400 Emery Paper.
  • Apply 3rd coat of Clear Acrylic Lacquer. Allow it to dry for 3-4 hrs.
  • Sand the coated surface along the grains Patten with 320 or 400 Emery Paper.
  • Apply 4th coat of Clear Acrylic Lacquer. Allow it to dry for 3-4 hrs.
  • Coated surfaces must be allowed to dry completely before use. Application pictorial is as follows."


RECOMMENDED SYSTEM FOR APPLICATION

Lacquer Coat Application:

Mixing Ratio: Base: Hardener

Recommended Thinner

Dilution/ Thinning % (In Vol.)

Recommended Coats*



TECHNICAL DATA

  (For Spraying) (For Brushing)
Coverage**  80 – 90 sq. ft/ltr/coat. 80 – 90 sq. ft/ltr/coat.
Drying Time Touch – dry :  XX minutes Touch – dry :  XX minutes
@30° ± 2°C &  RH 70 ± 5% Tack free: XX  hours
Recoating:   6- 8 hrs.
Hard dry: Over Night
Tack free: XX  hours
Recoating:   6- 8 hrs.
Hard dry: Over Night
Gloss at 60 °: (by Glossometer) Golss:
Matt:
Golss:
Matt:
Weight Per 10 Ltrs. Sealer
Golss:
Matt:
Sealer
Golss:
Matt:
Flash Point Above 15 °C. Above 15 °C.
Shelf-Life: 1 years from date of manufacture in original tightly closed containers away from  direct sunlight and excessive heat. 1 years from date of manufacture in original tightly closed containers away from  direct sunlight and excessive heat.

** Actual covering capacity may vary depending upon the Type of Wood used, Dilution/ Thinning ratio, Application Skills & Thickness, Surface Preparation & Condition and Surrounding Temperature.


PRECAUTIONS

  • Refer MSDS for "Nerolac Wonderwood Clear Acrylic Lacquer Wood Coatings" Gloss & Matt for safety measures & precautions.
  • Storage of product should be at dry condition and at Ventilated locations . Avoid exposure to high temperature, source of ignition and fire.
  • Keep away from childrens reach.
  • Avoid direct eye and skin contact. In case of eye/skin contact wash with plenty of water.
  • Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
  • Work in well ventilated place at 25 to 40°C and 75% humidity for best results.
  • Use of protective tools during application: rubber hand gloves, eye goggles and respirator mask.
  • not dispose in any drain or water channel. Dispose in land filling.
  • Volatile Organic Solvents present.


PACK SIZES


1 ltr., 4 ltrs., & 20 ltrs.


SHADE RANGE


Matt/Gloss

 

Switch Site | Gavrila Hardware